Enjoy 10% OFF everything! Orders placed by Jan 25th ship on Feb 4th
Hiwonder HPS-0127 Micro High-Speed Anti-Blocking Steering Servo, High Torque PWM Digital Servo, 270° Control Angle, Suitable for RC Cars/ Robotics DIY
- 【Clutch Protection Gear】Automatically engages during stalls to protect the servo, ensuring quick recovery and extended lifespan.
- 【High-Quality Potentiometer】High-precision potentiometers enhance accuracy and linearity, meeting the demands of precise robot movements.
- 【1.5KG Stall Protection】 Supports up to 1.5KG torque, with automatic clutch activation to maintain normal operation under excess load.
- 【0.05s/60° High-Speed】Optimized for high-speed performance, achieving 0.05s/60° at 7.4V, ideal for rapid movements.
- 【270° Precise Control】 Offers precise 0° to 270° control via PWM, thanks to the high-precision potentiometer.
High-Quality Potentiometer
Equipped with high-precision potentiometers, the accuracy and linearity are greatly improved, ensuring highly precise movement that meets the demands of robot building!
1.5KG Stall Protection
The servo supports a maximum torque of 1.5KG. When the load exceeds 1.5KG, the clutch protection is automatically triggered to ensure the servo operates normally.
0.05s/60° High-Speed
With deep optimization and upgrades, the servo achieves a high speed of 0.05s/60° under a 7.4V voltage, making it ideal for high-speed scenarios.
270° Precise Control
The servo uses a high-precision potentiometer and is controlled via PWM pulse width, allowing for precise control of the servo's output angle from 0° to 270°.
| Anti-Blocking Servo Comparison | |||
| Model |
HPS-0127 Servo
|
LFD-01 Servo
|
LFD-01M Metal Servo
|
| Weight | 9.5g | 10g | 13.8g |
| Size | 23.9*12*24mm | 22.3*12*23.2mm | |
| Working voltage | 7.4-8.4V | 4.8-6V | |
| No-load speed | ≤0.05sec/60° 7.4V | ≤0.11sec/60° 6.0V | ≤0.12sec/60° 6.0V |
| Maximum torque | ≤1.5kgf.cm 7.4V | ≤1.4kgf.cm 6.0V | ≤1.8kgf.cm 6.0V |
| Rotation range | 0-270° | 0-180° | |
| Stall protection | Clutch disengagement | Power-off after 5 sec stall | Current limit < 80mA after 5 sec stall |
| Control method | PWM pulse width control | ||
| No-load working current | ≤180mA | ≤60mA | ≤80mA |
| Stall current | ≤1A 7.4V (Clutch disengages to prevent lock-up) | ≤700mA 6.0V | ≤1.1A 6.0V |
| Gear type | Plastic axis (with clutch) | Plastic axis (no clutch) | Metal axis (no clutch) |
| Reduction ratio | 1:195 | 1:265 | 1:324 |
| Wire length | 150±5m (Exposed without plug) | 245±5m (Exposed without plug) | 455±5m (Exposed without plug) |
| Out shaft specification | 69*53mm/ 69*48mm | ||
| Board weight | 28g | ||
| Board layer | 40T/ ∅4.85mm | ||
| Parameters | |||
| Model | HPS-0127 micro high-speed anti-blocking servo | No-load current | ≤180mA |
| Stall protection | Clutch disengagement | Stall current | ≤1A |
| Weight | 9.5g | Control method | PWM pulse width |
| Size | 23.9*12*24mm | PWM pulse width range | 500-2500us, corresponding to 0-270° |
| Working voltage | 7.4-8.4V | Gear type | Plastic shaft (with clutch) |
| No-load speed | ≤0.05sec/60° 7.4V | Arm gear teeth count | 40T/ ∅4.85mm |
| Maximum torque | ≥1.5KG.cm 7.4V | Wire length | 150±5m (Exposed without plug) |
| Rotation range | 0-270° | Reduction ratio | 1:195 |
| Repeatability | ≤1° | Applicable to | various robot joints |
| Parameters | |
| Model | HPS-0127 micro high-speed anti-blocking servo |
| No-load current | ≤180mA |
| Stall protection | Clutch disengagement |
| Stall current | ≤1A |
| Weight | 9.5g |
| Control method | PWM pulse width |
| Size | 23.9*12*24mm |
| PWM pulse width range | 500-2500us, corresponding to 0-270° |
| Working voltage | 7.4-8.4V |
| Gear type | Plastic shaft (with clutch) |
| No-load speed | ≤0.05sec/60° 7.4V |
| Arm gear teeth count | 40T/ ∅4.85mm |
| Maximum torque | ≥1.5KG.cm 7.4V |
| Wire length | 150±5m (Exposed without plug) |
| Rotation range | 0-270° |
| Reduction ratio | 1:195 |
| Repeatability | ≤1° |
| Applicable to | various robot joints |
| Item | Specification |
| Model | HPS-0127 micro high-speed anti-blocking servo |
| No-load current | ≤180mA |
| Stall protection | Clutch disengagement |
| Stall current | ≤1A |
| Weight | 9.5g |
| Control method | PWM pulse width |
| Size | 23.9*12*24mm |
| PWM pulse width range | 500-2500us, corresponding to 0-270° |
| Working voltage | 7.4-8.4V |
| Gear type | Plastic shaft (with clutch) |
| No-load speed | ≤0.05sec/60° 7.4V |
| Arm gear teeth count | 40T/ ∅4.85mm |
| Maximum torque | ≥1.5KG.cm 7.4V |
| Wire length | 150±5m (Exposed without plug) |
| Rotation range | 0-270° |
| Reduction ratio | 1:195 |
| Repeatability | ≤1° |
| Applicable to | various robot joints |
Questions & Answers
Have a Question?
Be the first to ask a question about this.
