Grab Your Discount & a Christmas Mystery Gift!
Use code: XMAS2024
Hiwonder HPS-2527 25KG High Torque Digital Servo Full Metal Gear Supports Robotic Arm/RC Car/Single Shaft
- Large torque: 25kg.cm 7.4V large torque digital servo
- Metal gear: significantly improves servo’s accuracy and extend its service time
- 270°Rotation: the rotate angle range is 270° with accurate control
- Red metal shell: Oxidation metal shell for strong heat dissipation ability
- Size: 54.5mm x 20mm x 47.5mm(2.15inch*0.79inch*1.87inch);weight: 68g (0.16Ib)
| Product weight | 0.15Ib / 66g |
| Product size | 1.57*0.8*1.59inch / 40*20*40.5mm |
| Rotation speed | 0.20sec/60°(7.4V) |
| Stall torque | 25 kg·cm (277.6 oz·in) @7.4V |
| Working Voltage | 6-8.4V |
| Stall current | 2.4~3A |
| No-load Current | 100mA |
| Servo Horn | 25T |
| Servo Wire | 30cm(11.8inch) in length |
| Control Method | PWM pulse width control |
| PWM pulse width range | 500~2500us, corresponding to 0~270° |
| Duty Ratio | 0.5ms~2.5ms |
| Pulse Period | 20ms |
| Wire Layout | red wire: +; black wire: GND; white wire: PWM/signal |
| Rotation range | 0~270° |
| Servo accuracy | 0.3° |
25kg Large Torque
This servo boasts an impressive maximum torque of 25KG.CM 7.4V, enhanced by its accompanying metal servo arm. Delivering robust power, it is housed within an aluminum alloy casing that facilitates excellent heat dissipation, thereby effectively reducing power consumption.
All Metal Gear
This product showcases exceptional performance, minimal noise output, and the inclusion of metal gear and dual-ball bearings. By integrating a high-precision potentiometer, its accuracy and linearity are greatly enhanced leading to an extended service life.
Waterproof Protection
Crafted with high precision and thorough sealing, this servo provides an exceptional level of water resistance. This allows it to operate even in the presence of water splashes.
| Item | Specification |
| Product weight | 0.15Ib/ 66g |
| Product size | 1.57*0.8*1.59inch/ 40*20*40.5mm |
| Rotation speed | 0.20sec/ 60°(7.4V) |
| Stall torque | 25 kg·cm (277.6 oz·in) @7.4V |
| Working Voltage | 6-8.4V |
| Stall current | 2.4~3A |
| No-load Current | 100mA |
| Servo Horn | 25T |
| Servo Wire | 30cm(11.8inch) in length |
| Control Method | PWM pulse width control |
| PWM pulse width range | 500~2500us, corresponding to 0~270° |
| Duty Ratio | 0.5ms~2.5ms |
| Pulse Period | 20ms |
| Wire Layout | red wire: +; black wire: GND; white wire: PWM/signal |
| Rotation range | 0~270° |
| Servo accuracy | 0.3° |
Questions & Answers
Have a Question?
Be the first to ask a question about this.
