Save 10% on Everything!
Use code: ROBOT2024
Module/Sensor
- Support MP3, WAV, WMA format audio
- Compatible with LEGO
- Support Fat16 and FAT32 file system
- Support micro:bit, STM32, Arduino and Raspberry Pi
- 4-way tracking with high sensitivity
- 4PIN connector for easy wiring
- Compatible with LEGO
Sensor Module
Digital Tube Module: Hiwonder Robot Module Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
RGB Module: Hiwonder Robot Module Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Working current: 50mA
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 15mA
- Measurement distance: 2cm ～ 400cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50mm x 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 40mA
- Effective detection range: 2 ~ 25cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Voltage: DC 5V
- Current: Max 100mA
- Recognizable distance: 2~100mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Accelerometer measurable range: ±2, ±4, ±8, ±16g
- Gyroscope measurable range: ±250, ±500, ±1000, ±2000°/ second (dps)
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
OLED Display Module: Hiwonder Robot Module Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Communication method: IIC
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Voltage: DC 5V
- Current: 5mA
- Size: 50mm × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
