Accessory
- 【Note】If the package has the problem of missing part or servo issue, please contact us and we will solve it for you.
- 【Large Contact Surface】The gripper with a large contact area can grip objects more easily and more stably.
- 【Full Metal Structure】Aluminum structure makes BigClaw lighter and more durable.
- 【Parallel Symmetrical Gripping】The parallel and symmetrical grip design makes it easy to pick up objects of various shapes.
- 【Mounting Holes】The M3 and M4 holes on the gripper are left for you to DIY expansion.
- Operating load: about 9kg
- Maximum speed: 50mm/s
- High-Quality DC Geared Motor
- Industrial PVC Conveyor Belt
- Aluminum Alloy Bracket
- Adjustable Forward/Reverse Direction and Transport Speed
- Suitable for Robot/Robot Arm Automation Applications
- Powerful PS2 signal receiver
- Simply designed button and remoter
- Support robotic arm and humanoid robot control
- Only compatible with Hiwonder Serial Bus Servo Controller
- U-shape Frame
- Side Frame
- Bottom Frame
- Screw Package
- Adjust the parameter of servo
- Able to connect PC software
- Read the angle of the servo
- Can connect TXD and RDX of single-chip
- Light plastic frame significantly reduce weight of robot"
- Various form allow infinite expansion
- Compatible with Hiwonder all series double-shaft servo
- Bottom Bracket
- Inclined U-shape bracket
- Side bracket
- Straight U-shape bracket
- Screw Package
- Powerful PS2 signal receiver
- Simply designed button and remoter
- Support robotic arm and humanoid robot control
- Only compatible with Hiwonder channel servo controllers
- 【High Precision & Adjustable Speed Servo Tester】CPU uses a high-performance STM32 microcontroller with ARM Cortex-M3 core to control 16-channel servo movement with high precision and adjustable speed. With signal isolation protection, the servo output is isolated from the CPU to avoid servo current surge damage to the CPU.
- 【16-channel Intelligent Servo Controller】Support serial communication, the 16-channel servo controller can communicate with other microcontrollers through TTL-level serial communication, and other microcontrollers can send commands to the control board. So that your robot can realize intelligent control, you can play sound control, body sensing, tracking, light chasing, and obstacle avoidance with it.
- 【With Over-current Protection】Simple wiring. Built-in switch, easy to use, reduces wiring troubles. All 8-channel servo ports have over-current protection! It greatly prevents the servo from being burnt out due to block.
- 【Large Capacity Memory】16M large capacity memory, enough for your use. Can hold 230 action groups, each action group can hold 510 actions.
- 【2 Control Modes】Support online debugging, no need to install a driver. Support two offline running modes, you can run offline for 1 time or cycle offline countless times.
Sensor Module
Digital Tube Module: Hiwonder Robot Module Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
Knob Module：Hiwonder Robot Sensor Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50 × 20 mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
RGB Module: Hiwonder Robot Module Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Working current: 50mA
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
Line Follower：Hiwonder Robot Sensor Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
Ultrasonic Sensor: Hiwonder Robot Sensor Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Working current: 15mA
- Measurement distance: 2cm ～ 400cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
Touch Sensor: Hiwonder Robot Sensor Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50mm x 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
Infrared Obstacle Avoidance Sensor：Hiwonder Robot Sensor Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Working current: 40mA
- Effective detection range: 2 ~ 25cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks