Hiwonder LDX-218 Full Metal Gear Digital Servo with Dual Ball Bearing for Robot (Control Angle 180)
- 17kg large torque. 15 kg·cm (208 oz·in) @6V
- 17 kg·cm (236 oz·in) @7.4V
- Full metal gear
- 180 degree rotation
- Using high-precision potentiometer with new design
- Convenient plug-in wire
- 20kg large torque.
- Full metal gear significantly improves servo’s accuracy and extends its service time
- Dual ball bearing: one is the driving ball bearing, the other is the assistant ball bearing(support role)
- Use high-precision potentiometer with a new design. Accuracy and linearity have been greatly improved! Accurate movement can help you build up robots
- Convenient plug-in wire. In robots making the process, it is very convenient for you to replace the servo and the wiring will become much easier
1* 30cm servo wire
1* primary servo horn(4mm/0.157in thick)
1* assistant servo horn(2mm/0.078in thick)
15* M2*5 self-tapping screws
2* servo bracket
1* 30cm servo wire
1* primary servo horn(4mm/0.157in thick)
1* assistant servo horn(2mm/0.078in thick)
15* M2*5 self-tapping screws
2* servo bracket
| Item | Specification |
| Weight | 56g(1.97OZ) |
| Dimension | 40mm*20mm*51.4mm (1.57inch*0.78inch*2.02inch) |
| Speed | 0.16sec/60°(7.4V) |
| Accuracy | 0.3° |
| Torque | 15 kg·cm (208 oz·in) @6V;17 kg·cm (236 oz·in) @7.4V |
| Working Voltage | 6-8.4V |
| Min Working Current | 1A |
| No-load Current | 100mA |
| Spline | 25T(6mm diameter) |
| Default Wire | 30cm(13.78inch) in length |
| Control Method | PWM |
| Pulse Width | 500~2500us to (0~180deg) |
| Pulse Period | 20ms |
| Package List | 1* digital servo 1* 30cm servo wire 1* primary servo horn(4mm/0.157in thick) 1* assistant servo horn(2mm/0.078in thick) 15* M2*5 self-tapping screws 2* bracket |
Important Notes
-
Please use Li-Po battery to power the servo, Do Not use the dry battery. Otherwise, the servo will slow down the movement or even stop. (our servo has higher torque, it needs more power to drive).
-
Please use a short and thick power cord, Do Not use Dupont cord
-
Our servo can be controlled by Arduino, please refer to the Arduino library.
Questions & Answers
Have a Question?
-
can it run with only 5 volts ?
The working voltage range of this servo is 6 ~ 8.4V
-
Hi, What is the recommend power supply for this to run smoothly?
Ensure the voltage of the power supply ranges from 6 to 8.4V
-
Hi, Can you send me the dimensions of the motor including the mount brackets including the specific hole locations? thanks
Please check this link: https://drive.google.com/drive/folders/1w2ePtCDYvRrfQOh8qQFGh8gIWdlODLPq?usp=sharing
