LSC-24: Hiwonder 24 Channel Digital Servo Controller with 16M Memory/Arduino Compatible
- 【High performance chip】CPU uses high-performance STM32 single chip microcomputer with ARM Cortex-M3 corer, which can control servo motion with high accuacy and adjustable speed.
- 【Easy wiring】 Servo controller only has positive and negative power pole.
- 【Support serial port communication】The servo controller can be connected with other single chips which support TTL, other single chips can send instructions to the controller.
- 【Free driver】 Support online debugging, install drivers automatically.
- The CPU of 24-channel servo controller uses high-performance STM32 single chip microcomputer with ARM Cortex-M3 corer, which can not only control servo's movement, but adjust speed. It has 16M high-capacity memory to hold 230 action groups!
- The 24-channel servo controller has over-current protection, greatly prevents the servo from burning out because of the locked-rotor. Provide PC software which supports online graphical debugging.
- You can control 24-channel servo at the same time.
2.【Simple Wiring】The controller has built-in positive and negative power interfaces, which is simple to wire and easy to operate.
3.【Built-in Switch】The controller has a built-in switch, which is easy to use and reduces your wiring worries.
5.【Large Capacity Memory】16M large capacity memory, which caninclude 230 action groups, and each action group contains 510 actions!
6.【Low-voltage Alarm】When the positive voltage is lower than 5.6v, the buzzer will make a beep sound to remind users to charge the battery.
8.【Support External MP3 or Bluetooth Module】If you plug in the MP3 module, you can make the robot make sounds; if you plug in the Bluetooth module, you can control the robot through Bluetooth.
9.【Two Offline Operating Modes】The controller can be run offline once or cycled offline numerous times.
11.【24 Channels Overload Protection】The controller is equipped with 24-channel overload protection, which greatly reduces the risk of servo stalling and burning out.
12.【Signal Isolation Protection】The output end of the servo is isolated from the CPU to prevent it from servopower surge.
2.【Simple Wiring】The controller has built-in positive and negative power interfaces, which is simple to wire and easy to operate.
3.【Built-in Switch】The controller has a built-in switch, which is easy to use and reduces your wiring worries.
5.【Large Capacity Memory】16M large capacity memory, which caninclude 230 action groups, and each action group contains 510 actions!
6.【Low-voltage Alarm】When the positive voltage is lower than 5.6v, the buzzer will make a beep sound to remind users to charge the battery.
8.【Support External MP3 or Bluetooth Module】If you plug in the MP3 module, you can make the robot make sounds; if you plug in the Bluetooth module, you can control the robot through Bluetooth.
9.【Two Offline Operating Modes】The controller can be run offline once or cycled offline numerous times.
11.【24 Channels Overload Protection】The controller is equipped with 24-channel overload protection, which greatly reduces the risk of servo stalling and burning out.
12.【Signal Isolation Protection】The output end of the servo is isolated from the CPU to prevent it from servopower surge.
| Product dimension | 65*50mm (2.56*1.97inch) | Hole spacing | 54*44mm (2.13*1.73inch) |
| Product weight | 26g | USB control | support |
| PS2 handle | support | Maximum controlling quantity | 24 servos |
| Storage | 16M | Low-voltage alarm | support |
| Built-in switch | support | Over-current protection | support |
| Signal isolation protection | support | External MP3/ Bluetooth module | support |
| Secondary Development | support | Communication baud rate | 9600 |
- We provide PC software that supports online debugging, driver-free, automatic connection, and language switching.
- You can debug it through PC software without coding. Drag the slider to control the rotation of the servo. Quick debugging will make your project run successfully.
- The 24-channel servos can be controlled individually.
- We need to provide the 24-channel servo debugging board with 5-8.4V voltage.
- Connect the servo to the S0-S23 interface. The development board can send commands through the serial port or lCI to control the corresponding servo.
We provide three communication routines for Arduino, Raspberry Pi and Jetson Nano for your reference to facilitate your learning.
Questions & Answers
Have a Question?
-
1) For the LS-24, the manual said it can have an mp3 module to play sounds associated with groups. Is that option still available? 2) Is the bluetooth debugging module available? Thanks!
1) Sorry, the speaker should be purchased separately.
2) If you want Bluetooth module, please check this option: https://www.hiwonder.com/products/lsc-24?variant=40251079688279&_pos=1&_sid=b8961d156&_ss=r; If you refer to the TTL/USB debugging board, plaese visit this link: https://www.hiwonder.com/products/hiwonder-ttl-usb-debugging-board?_pos=1&_sid=64024d89d&_ss=r -
Hello - this is a great product. I hope the product won't be discontinued soon. Will the LS-24 be available for years and years in the future? Thanks!
Rest assured, we will continue production of this product. Thank you for your support of Hiwonder!
-
How would the correct protocol be written for running GROUP 1 from a Raspberry pi? Is this correct: ------------------------------------- import serial import time # Set up the serial connection to the LSC-24 ser = serial.Serial('/dev/serial0', 9600, timeout=1) # Command to run a specific group, e.g., group 1 group_number = 1 command = [0x55, 0x55, 0x06, 0x00, 0x06, 0x0B, group_number] # Send the command ser.write(bytearray(command)) # Close the serial connection ser.close() ------------------------------------- Thank you!
As the LSC-24 control does not include Python source code, we're unable to offer technical support for code review. However, we are happy to provide a tool to assist with your secondary development efforts. You can access the tool via this link: https://drive.google.com/drive/folders/1m2Jjdbc8SARE88QPGClqVZtvAAHdXN9U?usp=sharing
-
Is this controller compatible with Brookshireu2019s VISUAL SHOW AUTOMATION software?
Sorry. It is not compatible with this software:(
